>   smart plug

smart plug

  • WIFI Smart Plug for French
WIFI Smart Plug for French

WIFI Smart Plug for French

French WIFI Smart Plug,3500W wifi socket

Item : French Smart Plug
Model No. : FSP35000116
Mains voltage : 230VAC 50Hz
Load : Max 3500W
Operation Frequency : 2.4 GHz - 2.483 GHz
Range (Typical) : 100-200m
Operation temperature : Ta: -20°C ~ +50°C
Case temperature (Max.) : Tc: +80°C
Storage temperature : -10°C ~ 60°C
Max. relative humidity : 20 ~ 90%
IP rating : IP20
Insulation : Class I
Security mechanism : WEP / WPA-PSK / WPA2-PSK
Security type : WEP64 / WEPI 28 / TKIP / CCMP(AES)
EMC standard (EMC) : EN62311, EN61000
Safety standard (LVD) : IEC/EN 60950, AS/NZS 60950
Radio Equipment (RED) : EN300328, EN301489
>Work with Amazon Alexa/ Echo Dot& Google home& IFTTT.
>Manage your devices via your mobile phone or Voice Control.
>Intelligent Schedule - Smart Plug could create multiple schedules to turn on/off your electronic sets.
>Energy Monitoring - Statistical power consumption.
>Reset - Press the on/off button for more than 5 seconds until the Wi-Fi indicator starts to  ash quickly. Wi-Fi Smart Plug is now ready for synchronization.
1. Installation must be carried out by a qualified engineer in accordance with local regulations.
2. Disconnect power supply before installing.
3. Ensure environmental conditions are suitable for electronic equipment.
Make sure your router is con gured to 2.4G,and your Smartphone is connected to this 2.4G network
Make sure the electronic device shown on your iOS/Android "smart life" APP is the one plug ged into the Wi-Fi Smart Plug.
Make sure you have a strong Wi-Fi signal at the Wi-Fi Smart Plug.
Make sure there are not too many devices connected to your router at the same time. You may temporarily turn off some other devices connected to the router and turn them back on again after the con guration is complete.
The number of Wi-Fi products that can be connected to the router depends on the performance of the router.
Make sure the "AP isolation/Access point" function is deactivated on your router.
Make sure no extra log in page is enquired in the browser after your device is connected to Wi-Fi
The Wi-Fi Smart Plug only works with a Wi-Fi network when  rst installation.
Wi-Fi Smart Plug needs to be set up again if the SSID or password is changed.
No need to set up the Wi-Fi Smart Plug again when you turn it off or unplug it from one socket and plug it into another socket.
Hard Reset: Press ON/OFF button for 5 seconds and release it.The Wi-Fi indicator light will  ash quickly.Wi-Fi Smart Plug is now ready for synchronization.

Contact Us

Contact: Michael

Phone: 13332996535

Tel: 0755-89705011

Add: 1107, Yonghui Bldg., Junction of Baoyuan Road, Xixiang Subdistrict, Bao'an District, Shenzhen

Scan the qr codeClose
the qr code